Product Data Sheet Show all documents

SikaCeram® Easy Grout

Grout mortar for ceramic tile

SikaCeram® Easy Grout is a single-component, semi-flexible grout mortar for ceramic tiles. Joint width: 2 to 12mm.

  • Good adhesion to surfaces.
  • Good water resistance
  • Easy to apply.
  • Resistant to abrasion and frost.
Find a Distributor
Product Data Sheet Show all documents

Usage

  • Grouting all types of ceramic tiles.
  • Interior and exterior application.
  • Application on floors and walls
 

Advantages

  • Good adhesion to surfaces.
  • Good water resistance
  • Easy to apply.
  • Resistant to abrasion and frost.

Packaging

2 kg and 5 kg bags

Colour

Powder form.

Colours: Grey or Off-white

Product Details

Product Information

Shelf life

12 months from date of production 

Storage conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions.

Density

Fresh mortar: 1.6 kg/l

Maximum grain size

Dmax : 0.3mm

Bulk density

1.5 kg/l
Technical Information

Compressive strength

≥ 15 N/mm²

(EN 12808-3)

Flexural-strength

≥ 2.5 N/mm²

(EN 12808-3)

Shrinkage

≤ 3mm/m

(EN 12808-4)

Water absorption

≤ 5g after 30min

≤ 10g after 240min

 

Application

Application Information

Ambient air temperature

Minimum +5°C - Maximum +35°C

Substrate temperature

Minimum +5°C - Maximum +35°C
Consumption

Consumption

Consumption depends on the size of the coating (width x length x thickness of the tile) and the thickness of the joint.

As a guide, SikaCeram® Easy Grout consumption is given in the following table, expressed in kg/m².

       

      

       Tile size in cm

                       Joint Width in mm

4

8

12

            5 x 5 x 0.6

1.2

2.5

3.7

          10x 10 x 0.7

0.7

1.4

2.2

         20 x 20 x 0.7

0.4

0.7

1

         30 x 30 x 0.8

0.3

0.5

0.8

         40 x 40 x 0.8

0.2

0.4

0.6

           

         
Application steps

MIXING

Mix with clean water to the desired consistency, then mix using a low-speed electric mixer until a homogeneous paste without lumps is obtained. The mixing ratio is approximately 29% ±1%, which is 0.58 liters of water for 2 kg of SikaCeram® Easy Grout

APPLICATION

Fill joints and spread with a plastic spatula.

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water after use. Hardened material can only be removed mechanically.

 

Documents