Tired of dealing with dampness at home? Sika has got you covered! The damp proofing solutions promise to eliminate dampness once and for all.
What you will need
- Cemflex®
- Cemflex® Membrane
- Super Sikalite®
- Portland Cement
- Water
- Wire brush
- Block brush / large paint brush
- Bucket to mix
- Gloves
- Mask
- Mechanical mixer and paddle (quantities exceeding 5l)
Product Information
Step 1: Surface Preparation
- Remove all existing coatings from the walls.
- In cases of severe plaster deterioration, remove plaster back to the concrete or brick base.
Step 2: Cleaning and Dampening
- Thoroughly clean the entire surface to be treated.
- Lightly dampen the surface with water, avoiding puddles or standing water.
Step 3: Apply Cemflex® Slurry
- Apply the first coat of Cemflex® slurry to the dampened surface using a brush.
- Allow the first coat to dry completely (refer to the Cemflex® datasheet for specific drying times and mixing instructions).