Super Sikalite® is a powdered waterproofing admixture, which blocks the capillaries and pores in Portland cement/sand mortars preventing the movement of moisture.
What you will need
- Super Sikalite®
- Portland Cement
- Water
- Wire brush
- Block brush / large paint brush
- Bucket to mix
- Gloves
- Mask
Product Information
Step 1: Surface Preparation
- Remove all existing plaster and damaged material from the surface.
- Ensure the surface is clean and free from dust, dirt, and loose particles.
- Dampen the concrete surface evenly, ensuring it is saturated but without standing water.
Step 2: Mixing Super Sikalite®
- Mix 1 kg of Super Sikalite® with 50 kg of cement to create a plastering mortar.
- Use clean water to achieve the desired consistency for plastering.
- Mix thoroughly to ensure even distribution of Super Sikalite®.
Step 3: Application
- Apply the prepared plastering mortar to the cleaned surface using appropriate tools (e.g., trowel).
- Ensure even coverage and thickness as per desired finish.
- Allow the plaster to dry completely according to the product's specifications.
Step 4: Cleanup
- Clean all tools and equipment immediately after use with water.