Product Data Sheet Show all documents

Sika® Antisol® E

Concrete curing compound

Liquid curing compound for preventing water loss in concrete. Ready for use and simple to apply.
Sika® Antisol® E complies with ASTM C 309-81 type 1 or 2 Class A.

  • Reduces incidence of plastic cracking
  • Ensure achievement of desired strengths
  • Minimizes shrinkage
  • Reduces dusting
  • Increases frost resistance
  • Alleviates other costly methods such as hessian-watering
Find a Distributor
Product Data Sheet Show all documents

Usage

Sika® Antisol® E is sprayed onto newly laid concrete surfaces to form a thin film barrier against premature water loss. Without disturbance to the normal setting action, the concrete is the allowed to cure and achieve maximum properties. Sika® Antisol® E is particularly useful in large areas of exposed concrete, such as:
  • Highways
  • Runways and taxiways
  • Aprons and hard standings
  • Roof decks
  • Retaining walls
  • Pre-stressed beams and piers
  • Irrigation canals / channels
 

Advantages

  • Reduces incidence of plastic cracking
  • Ensure achievement of desired strengths
  • Minimizes shrinkage
  • Reduces dusting
  • Increases frost resistance
  • Alleviates other costly methods such as hessian-watering

Packaging

  • Pails of 5 and 20 litres
  • Drum of 200 litres
  • Container of 1000 litres

Colour

Liquid-Emulsified Paraffin wax Whitish

Product Details

Product Information

Shelf life

12 months from date of production

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C.

Always refer to packaging.

Density

0.99 ± 0.02

pH-Value

4±1

 

Application

Consumption

Consumption

0.15 - 0.20 lit/m2

Consumption depends on wind speed, temperature and humidity during application.

These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
Application steps

APPLICATION

Stir thoroughly before use to ensure full dispersion of solids.

Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.

 

Documents